Features
- Single or dual tank system
- The Husky 12 is designed to pump any class A or class B foam, even high-viscosity, alcohol-resistant class B foams.
- Hydraulic drive powered to avoid heavy amp draw loads on the chassis electrical system (less than 5 amp).
- Single point, direct injection, flow based system using digital technology to indicate pump position and flow meter.
- A 12 gpm foam pump provides capacity to handle structure, wildland and automotive fires, as well as medium class B spills.
- The system uses patented flow meter-based technology and is highly accurate over a wide range of pressures from 75 psi to 250 psi.
- The system is easy-to-operate, with just a one-button operation required to create foam.
- 4.30” digital LCD screen that displays foam flow, water flow, foam percentage, foam used, water used, maintenance reminders and diagnostics. The LCD screen also allows you to adjust pre-set foam percentages, calibrations and foam tank defaults (on dual tank systems).
- Foam percentage is easily adjustable. Class A percentages are adjustable from 0.1% to 9.9%.
- A built in flush system, so you do not need to pick up clear water to flush the system.
- The system is equipped with an auxiliary foam pick-up, which allows use of another foam that is not stored in the foam tank and/or continued foam operation when foam is depleted out of the tank.
- A foam tank refill system is available to fill the foam tank(s) from the ground.
Video
